Ball Screws/Shaft Couplings Cable Chains Cables for Automation Cameras for Automation Contactors/Relays Control Systems and PLCs Heating/Cooling for Automation Hydraulics Gear Reducers/Gear Heads Lab/Analytical Equipment Lasers Linear Actuators Linear Guides Liquid Valves/Flow Controls Manufacturing/Metalworking Motors for Automation Optics Power Supplies/Circuit Breaker Pneumatic Actuators/Cylinders Pneumatic Valves Safety Hardware for Automation Sensors Servo Motors/Servo Drives Stepper Motors/Stepper Drives Switches for Automation Transformers Vacuum Equipment Wiring for Automation Other View All Items
Add Motion Constrained to your favorite stores and receive our exclusive emails about new items and special promotions!
|Amplifier Drift||0.3μV/°C07||Amplifier input Noise||1.7 nV/-Hz and 1.5 pA/-Hz|
|Frequency response||> 250 kHz (without tuning)||Resistance Measurement||0.1% ±0.01 ohms|
|Operating resistance||2 to 80 ohms||Maximum probe current||800 mA (1.6 A with high-power setting)|
|Output||Bridge voltage to 11.5 volts||Size||7 in. x 19 in. x 16 in.|
|Number of channels||Up to eight per cabinet; 16 channels supported by standard software||Input power||100/120/220/240 VAC, 50-60 Hz|
|Temperature measurement||0 to 10 V in 10 mV steps, 0.15% accuracy||Gain||1 to 1000 (1.0 MHz maximum bandwidth, 0.15% accuracy|
|Low pass filters||Linear phase, 12 Hz to 1 MHz; 13 settings; -60 dB/decade||High pass filters||0.1, 1, 10 Hz; 60 dB/decade|
|Output (analog)||-5 to +5V||TSI BNC Connector Board||Model # 2615288|
Here Is a TSI Ifa-300. Other then some cosmetic scraps it appears to be in great shape. We have no way to test the unit, It appears to power on just fine though. This unit also comes with an 8 channel BNC Connector Board(2615288), the A/D Board(PD2-MFS-4-1M/12) and the connecting cable. There are no probes included with this unit.
PA 02-02 10/18 CDC