Description
Here is a new heavy duty import plate bending rollers. The OEM rating for these is 4.5mm x 1300mm. Most importers of these 120mm diameter roll machines switch this to 3/16″ thick. We find this rating rather slippery as 4.5mm is less than 3/16″ so we conservatively specced our imports for 8 gauge (0.171″) which it does well. We have used one of these rollers in house and have been very pleased with it. The construction is good and with the pre-crowned hardened rolls, it keeps sheets very flat parallel to the rolling axis. Further specs are listed below. These are in stock in our warehouses and are ready to ship. Specs listed below. Home POLICIES CONTACT US ABOUT ME FEEDBACK view all items Menu Home POLICIES CONTACT US ABOUT ME FEEDBACK view all items Categories Ball Screws / Shaft Couplings Cable Chains Cables for Automation Cameras for Automation Contactors/Relays Control Systems and PLCs Heating/Cooling for Automation Hydraulics Gear Reducers / Gear Heads Lab/Analytical Equipment Lasers Linear Actuators Linear Guides Liquid Valves/Flow Controls Manufacturing / Metalworking Motors For Automation Optics Power Supplies/Circuit Breaker Pneumatic Actuators /Cylinders Pneumatic Valves Safety Hardware for Automation Sensors Servo Motors / Servo Drives Stepper Motors /Stepper Drives Switches For Automation Transformers Vaccum Equipment Wiring for Automation New EPR-51X8-HP Heavy Duty 3/16″ x 50″ Power Bending Roller / Slip Roll 3 HP item specifications
| Manufactuer | TZ-B |
| Model | EPR-51X8-HP |
| Roller Diameter (all 3) | 120mm (4.72″) |
| Minimum Bending Diameter | 150mm (6″) |
| Capacity | 8 Gauge Mild Steel / 51″ |
| Roll Max Opening | 1/2″ |
| Pre-Bend | 0.16″ |
| Rolling Speed | 22 RPM (~27 FPM) |
| Motor Power | 3 HP (2.2 kW) |
| Motor Input Voltage | 200-240V / 3-Phase 60 Hz (Can be Rewired for High Voltage 400-480V) |
| Features | Hardened Pre-Crowned Rollers Foot Safety Line All Around with Additional E-Stops Swing Out Top Roller / Spherical Roller Bearings  Accurate Heavy Durty Welded Steel Frame |
| Included Accessories | Forward and Reverse Foot Switch with E-Stop Operation / Parts Manual Adjustable Cone Rolling Attachment |
description
Here are some new heavy duty import plate bending rollers. The OEM rating for these is 4.5mm x 1300mm. Most importers of these 120mm diameter roll machines switch this to 3/16″ thick. We find this rating rather slippery as 4.5mm is less than 3/16″ so we conservatively specced our imports for 8 gauge (0.171″) which it does well.Â
We have used one of these rollers in house for about 4 years and have been pleased with it so we decided to import more for our customers as we have container space. The construction is good and with the pre-crowned hardened rolls, it keeps sheets very flat parallel to the rolling axis. Further specs are listed above. These are in stock in our warehouses and are ready to ship. Specs listed above. Half the pictures show our own machine used after 2 years of use for reference.Â
These ship LTL for a flat $350Â to a business address (with dock and/or forklifts) within the contiguous US.Â
LOCATION: WH2
LIST: 1/22 +24 NDÂ
Categories Ball Screws / Shaft Couplings Cable Chains Cables for Automation Cameras for Automation Contactors/Relays Control Systems and PLCs Heating/Cooling for Automation Hydraulics Gear Reducers / Gear Heads Lab/Analytical Equipment Lasers Linear Actuators Linear Guides Liquid Valves/Flow Controls Manufacturing / Metalworking Motors For Automation Optics Power Supplies/Circuit Breaker Pneumatic Actuators /Cylinders Pneumatic Valves Safety Hardware for Automation Sensors Servo Motors / Servo Drives Stepper Motors /Stepper Drives Switches For Automation Transformers Vaccum Equipment Wiring for Automation knowledgable
staff fast
shipping industrial
quality 100%
Satisfaction Shipping Payment returns About us Shipping
Shipping Costs
We do not look to make money on shipping charges. We only try to cover actual postage and shipping costs. If you feel a shipping quote is too high, please contact us as we may very well be able to do better. The eBay calculator is simply one estimate and can be off at times. On some products, we offer Free Shipping to the 48 contiguous states. For Alaska, Hawaii, US Protectorates, APO/FPO please contact us for shipping costs on these items.
Turnaround Time
About 95% of our orders ship within one business day and if you let us know there is a rush, we can almost always ship the same day. Freight items usually have a 2 day turn around time.
Next Day Shipping
We can offer next day shipping on just about all our products even if it’s not shown as an option on the shipping calculator. Please contact us for next day shipping options. We usually can get products out the same day even if paid for as late as 4:00 PM MST.
Will You Reduce the Value of an Item on the Commercial Invoice to Reduce Customs Fees
No, unfortunately, we cannot reduce an item’s value on an invoice or shipping document. We understand paying customs fees is no fun (we have to pay them often as well), but lying about customs fees is against federal law and eBay policy and the fines are severe.
Can You Ship on My Account/Local Pickup
Yes, we can ship on a customer’s UPS and FedEx account. Local pickups are also accepted weekdays from 10-5 PM and by appointment.
Packaging
We take packaging very seriously and use only the best void fill and cushioning products. We have a foam in place system, full crating department, and hundreds of in-stock box sizes. We feel the added cost of the best shipping materials is worth it to make sure your products arrive safely.
Freight/Items near/over 150 lbs/ Very Large Items
Many of our products are too large to ship through small package couriers and must be shipped truck freight. We have a loading dock and get very competitive rates with all the common freight couriers. Please contact us if an eBay freight quote seems high as we can almost always beat that rate by a considerable margin. We will need a phone number and address details to schedule a freight shipment for you. As always, buyers are welcome to arrange their own freight pickups. In most cases, items will be fully crated. Depending on the size of the item there may be a palletizing/crating fee. This fee will vary depending on the size of the item. Please contact us for pricing
Payment
Payment Time
Payment is typically requested within four business days and non-payment claims are usually started after a week. Please contact us in advance if you need special arrangements.
Payment Methods
We accept Paypal and all major credit cards. We are now accepting NET30 payment plans from major companies and universities.
Returns
Customer Satisfaction
We strive for 100% customer satisfaction and will do everything possible to maintain this. Our feedback is proof of our effort to maintain very high customer satisfaction.
Product Functionality/Guarantee Policy
Unless specifically stated in a listing, all our products are guaranteed in working shape upon arrival. Due to the technical nature of many of the products we sell, we cannot test every item, but we do guarantee them working all the same. We offer a 30 day no questions asked return policy. If an item arrives damaged or defective, we will cover the cost of return shipment.
Longer Test Times/Return Policy
We completely understand that many of our automation products take a considerable amount of time and effort to implement into a machine or fully test and can often offer a longer return time/testing period if necessary. Please contact us for more details.
Returns
We offer a 30 day no questions asked return policy. No RMA number is necessary as we get very few returns. Just let us know that you wish to return an item and we will provide the necessary return information.
In the unlikely event an item is defective/damaged in shipping/ or does not match our description, we will cover the cost of return shipment either through a Paypal payment or we can send a return label. In all other cases, we do ask that the buyer covers the cost of shipment. Refunds are processed promptly and will have no restocking/return fee unless an item sold as new is not received back in the condition it was sent. In the case a new item is not returned back in the condition sent, the buyer will be charged a 20% restocking fee.
About us
Where Do You Get All This Stuff?
Most of our inventory comes from larger companies going out of business or downsizing equipment. We also purchase truckload quantities from industrial auctions and privately negotiated sales. We are very competitive when we buy and purchase only new and used good functional industrial automation equipment.
Capabilities
Six hard-working individuals run our shop, process equipment, list inventory on eBay, and ship daily. We also have CNC manufacturing equipment for refurbishing actuators and other motion control hardware which is our specialty.
store newsletter
Sign up and receive our email newsletters about new items and special promotions.
sign up » Home POLICIES CONTACT US ABOUT ME FEEDBACK view all items
Copyright © Motion Constrained LLC. All rights reserved.
eBay Template Design by OCDesignsOnline
| Get images that make Supersized seem small. |
Showcase your items with Auctiva’s Listing Templates! |
