Description
Ball Screws/Shaft Couplings Cable Chains Cables for Automation Cameras for Automation Contactors/Relays Control Systems and PLCs Heating/Cooling for Automation Hydraulics Gear Reducers/Gear Heads Lab/Analytical Equipment Lasers Linear Actuators Linear Guides Liquid Valves/Flow Controls Manufacturing/Metalworking Motors for Automation Optics Power Supplies/Circuit Breaker Pneumatic Actuators/Cylinders Pneumatic Valves Safety Hardware for Automation Sensors Servo Motors/Servo Drives Stepper Motors/Stepper Drives Switches for Automation Transformers Vacuum Equipment Wiring for Automation Other View All Items
Add Motion Constrained to your favorite stores and receive our exclusive emails about new items and special promotions!
Cutler-Hammer 13150RD07 Prism Photoelectric R/A Series A1
Make | Cutler-Hammer | Model | 13150RD07 |
Input Voltage | 10-30VDC | Power Dissipation | 1.5 W max |
Output Type | Solid State Relay | Output Isolation | 400 V max |
Voltage Switching Capacity | 200VAC peak; 180 VDC | Current Switching Capacity | 80mA AC load; 110mA @ 132VDC (derate-100mA @ 180VDC) |
Off-State Leakage | 10 µ max | On-State Resistance | 25 ? max |
Response Time | 3 mS | Light/Dark Op | Specified by model # |
Temp Range | Operating: -25°-+55° C; Storage: -25° – +70° C | Lens | Polycarbonate |
Cable Jacket | PVC | Body | Structural Polyurethan Foam |
Cable/Connector | 6-foot cable, 4-wire; micro connector, 4-pin male | Vibration | 30g over 10Hz to 2kHz |
Shock | 50g for 10mS 1/2 sinwave pulse | Sunlight Immunity | 1,000 foot-candles |
Indicator LED | Lights steady when output is ON | Enclosure Ratings | NEMA 1,2,3,4,4x,6,12, and 13 |
Approvals | UL and C-UL recognized, CE compliant | Sourse | Infrared, 880 nm |
Max Range | 8 inches (203mm) | Optimum Range | 0.1-5 in (3-127mm) |
Field of View | 0.6 in (15mm) diameter at 5 in (127mm) |
Here is a Cutler-Hammer 13150RD07 SER A1 Prism Photoelectric R/A. Short circuit Protection: Protected (current limited) for loads less than 32 Volts AC or DC. IMPORTANT: Output will reset automatically when short is removed. (There is no visual indication of a short circuit condition). Ranges based on a 3 in diameter retroreflector. Retroreflector not included. Sensor will detect a 90% reflectance white card at this range.